It is mainly used for measuring the enclosed volume flow in pipes of conductive liquid and slurry. Including the acid, alkali, salt and other corrosive liquid.
Product features:
1, the measurement is not affected by the fluid density, viscosity, temperature, pressure and conductivity changes;
2, the measuring tube without obstructing the flow components, no pressure loss, lower straight pipe section;
3, Series nominal diameter DN15 ~ DN3000. Sensor lining and electrode materials have a variety of options;
4, converter using a novel excitation mode, low power consumption, zero point stability, high accuracy. Flow range up to 1500:1;
5, the converter can form a shape or a separation type and sensor;
6, converter using high performance 16 bit microprocessor, 2x16LCD display, convenient parameter setting, programming and reliable;
7, flowmeter for bidirectional measurement system, in which three integrator: forward, reverse total amount and the difference amount; can be displayed. Zhuang, reverse flow, and has a variety of output: Current, pulse, digital communication, HART;
8, converter using surface mount technology (SMT), with self test and self diagnosis function;
Parameter
Item The Specifications of electromagnetic flowmeter |
|
Measuring fluid |
conductive fluid |
Caliber |
DN10-DN3000 |
Electrode materials |
Mo2Ti HC HB Pt Ta Ti |
Lining Material |
PTFE, PFA (resistance to negative pressure), chloroprene rubber, polyurethane, hard rubber (optional conductive ground rubber ≥ DN125) |
Electrode Type |
Standard type 316L, scraper-type (DN ≥ 50) |
Dielectric conductivity |
> 5μs/cm (water> 20μs/cm) |
Accuracy grade |
±0.5% RS. |
Repeatability |
±0.1% |
Flow Range |
0-10m/s |
Maximum temperature of medium |
A size ≤ 90 , min size ≤ 180 (rubber ≤ 65 ) |
Temperature |
-25 - 65 |
Working pressure |
1.0Mpa-4.0Mpa, the special supplier overpressure |
Protection Level |
IP65, IP67, IP68 (optional) |
Output |
4-20mA current output ,0-1kHz frequency output, pulse output per unit volume |
Power |
220VAC 110VAC |
Standard |
Q/SMAU2-2006 |
Auxiliary converter |
BF900C/F |
Flange |
National standard GB9115, ANSI, JIS |
Installation Type |
Split, integrated |
www.chinaguiding.com/Product/3659285856.html